TEAC AP-505 Owners Manual EN FR SP - Page 13

Basic operation In order to protect the speakers, turn the power for systems that this unit is connected to on and off in the following order. 4 Turn this unit on. NOTE This explanation assumes that a preamplifier is connected to this EN unit. When connecting a UD-505, NT-505, UD-503 or NT-503 IMPORTANT NOTICE Set the LINE OUT LEVEL to VARIABLE on the UD-505, NT-505, UD-503 or NT-503 in advance. NOTE oo The UD-505, NT-505, UD-503 and NT-503 are equivalent to preamplifiers. oo When using a UD-505, NT-505, UD-503 or NT-503 as a USB DAC or using an NT-505 or NT-503 as a network player, it functions as a preamplifier and a source device. Connection example Source device CD player or other audio output device The level meters will blink and the mute function will turn on. When the amplifier operation stabilizes, they will light and the mute function will turn off. 5 Start playback on the source device, and adjust the volume on the preamplifier. Adjust the preamplifier volume after the level meters on this unit stop blinking and stay lit. Turning the power off Preamplifier Preamplifier or other device with a preamplifier function (such as a DAC) 1 If a connected device is playing back, stop playback. 2 Minimize the volume of the preamplifier. 3 Put the unit into standby mode. AP-505 Turning the power on 1 Minimize the volume of the preamplifier. If using a device that cannot have its volume adjusted when it is off, minimize the volume after turning it on. 2 Turn the source device on. 3 Turn the preamplifier on. 4 Turn the preamplifier off. 5 Turn the source device off. 13