TEAC AP-505 Owners Manual EN FR SP - Page 15

Automatic power saving function Restoring default settings This unit has an automatic power saving function. If the automatic power saving function is set to on, the unit will 1 While pressing the DIMMER/METER GAIN automatically enter standby mode if there is no audio input for about 30 minutes. button, set the STANDBY/ON switch to ON. EN Turning automatic power saving on and off 1 While pressing the DIMMER/METER GAIN button, set the STANDBY/ON switch to ON. 2 When the level meters blink, release the DIMMER/METER GAIN button. 2 Immediately after setting the STANDBY/ON switch to ON, release the DIMMER/METER GAIN button. Keep pressing until the level meters blink. The factory default settings will be restored, and after the level meters blink twice at 0.4-second intervals, the unit will enter standby. Release immediately after setting the STANDBY/ON switch to ON. Releasing the DIMMER/METER GAIN button will switch the automatic power saving function between on and off and the level meters will blink. You can check the automatic power saving setting by the blinking of the level meters at this time. Automatic power saving function on Meters blink every 3 seconds. Automatic power saving function off After blinking twice at 0.4-second intervals, meters continue to alternately become lit and unlit at 3-second intervals. 15