TEAC CD-W540E User Manual - Page 21

Notes, Windows NT 4.0 Workstation Users - driver

Get TEAC CD-W540E PDF manuals and user guides View all TEAC CD-W540E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

High Speed Recording Guidelines Notes: ❑ The IDE CD-RW drive is a true Plug-N-Play device; therefore, it will be detected automatically by Windows 98SE/Me/2000-Professional/XP. There is no need to install any drivers. ❑ Windows NT 4.0 Workstation Users: Windows NT 4.0 does not support the Plug-N-Play feature. Therefore, confirm that the IDE CD-ROM DRIVE ATAPI version 1.2 driver is installed. If not, open the Control Panel, double click "SCSI Adapters," click the "Drivers" tab, then click the "Add" button. At the "Select a SCSI Adapter Option" window, select "IDE CD-ROM DRIVE (ATAPI Ver 1.2)." Click "Install" and follow the instructions on screen. ❑ The drive is recognized by the operating system as a typical CD-ROM drive. Once you confirm that you can read (play) data discs from the CDRW drive, install the Roxio software to enable recording to CD-R and CDRW discs. (For more information, see Chapter 3, beginning on page 15.) TEAC CD-RW Drive User's Manual 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
High Speed Recording Guidelines
TEAC CD-RW Drive User’s Manual
13
Notes:
❑
The IDE CD-RW drive is a true Plug-N-Play device; therefore, it will be
detected automatically by Windows 98SE/Me/2000-Professional/XP. There
is no need to install any drivers.
❑
Windows NT 4.0 Workstation Users:
Windows NT 4.0 does not support the Plug-N-Play feature. Therefore, con-
firm that the IDE CD-ROM DRIVE ATAPI version 1.2 driver is installed. If
not, open the Control Panel, double click “SCSI Adapters,” click the “Driv-
ers” tab, then click the “Add” button. At the “Select a SCSI Adapter
Option” window, select “IDE CD-ROM DRIVE (ATAPI Ver 1.2).” Click
“Install” and follow the instructions on screen.
❑
The drive is recognized by the operating system as a typical CD-ROM
drive. Once you confirm that you can read (play) data discs from the CD-
RW drive, install the Roxio software to enable recording to CD-R and CD-
RW discs. (For more information, see Chapter 3, beginning on page 15.)