TEAC P-55-111 Instruction Manual - Page 25

SECTION 11 : Error Messages Explained NOTE Note 5 Check the shaft flange The COLOR and PHOTO ribbon shafts are of different for dirt. colors so that the printer can identify the two ink ribbons. The PHOTO ink ribbon has a white shaft and the shaft flange may get dirty depending on the environment. If the PHOTO ribbon shaft has some dirt on the flange, the printer may identify such a ribbon as COLOR ribbon by mistaking the dirt for black from a COLOR ribbon shaft. If the message "ERROR Wrong Ribbon Set" is displayed when the correct set of PHOTO ink and transfer ribbons are loaded, check the flange at the protrusion of the ribbon shaft for dirt. If you see any dirt on the protrusion, wipe it off. *Do not use benzine, thinner, or any other equivalents as a cleaning agent. Note 6 How to mount the disc adapter 1) Set the slide switch on the front of the tray drawer to the RELEASE position. 2) Snap the protrusion of the adapter into the cut-out in the tray, as shown below. 3) Make sure that the adapter firmly sits on the table and then lock the adapter in place by setting the slide switch to the LOCK position. Mounting Disc Adapter-1 Protrusion Disc adapter Cut-out Tray Mounting Disc Adapter-2 25