TEAC P-55-111 Instruction Manual - Page 30
the hole provided in the cartridge for ease
View all TEAC P-55-111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SECTION 12 : Loading Ribbons 4) Place the re-transfer ribbon with the supply shaft on the left and the take-up shaft on the right, and their protrusions facing you and their openings facing away from you. 5) Insert the open end of the take-up shaft into the hole provided in the cartridge (for ease of work, we recommend holding the shaft by inserting your index finger into its open end), and snap the protrusion at the other end of the shaft into the cut-off in the cartridge. 6) In a similar way, put the supply shaft into the re-transfer ribbon cartridge. 7) Turn the take-up shaft clockwise to take up ribbon slack. NOTE If you perform the next step without taking up ribbon slack, there is a chance that the ribbon might be broken. 8) Mount the re-transfer ribbon cartridge in the P-55 itself. When mounting the ribbon cartridge, push it directly and slowly. If you try to force it in slantwise, there is a chance that the ribbon might be broken. If the ribbon clogs somewhere, take out the cartridge, take up ribbon slack again, and slowly re-insert the cartridge. 30