TEAC UD-301 Owner's Mamual (English, Français, Español) - Page 16
Specifications
View all TEAC UD-301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Specifications Analog audio output Jacks XLR jacks (2 channels) × 1 RCA jacks (2 channels) × 1 Output impedance XLR: 200 Ω RCA: 100 Ω Maximum output level (1 kHz, full scale, 10 kΩ) XLR (Gain: 0 dB): +14 dBu RCA: 2.0 Vrms Frequency response 5 Hz to 55 kHz (−3 dB)* Signal-to-noise ratio (S/N 105 dB Total harmonic distortion 0.0015% (1 kHz)* *At 192kHz sampling frequency Digital audio input RCA jack × 1 0.5 Vp-p (input impedance 75 Ω) Optical digital connector × 1 −24.0 to −14.5 dBm peak USB port (type B) connector USB 2.0 Supported sampling frequencies (PCM) in kHz 321)/44.1/48/88.2/96/176.4/1922) Data bit length 16/24/323) Supported sampling frequencies (DSD) 2.8/5.6 MHz (only when connected by USB) Headphones output Connector type. . . . . standard 6.3mm (1/4") stereo jack Maximum output 100 mW + 100 mW (into 32Ω load with 0.1% distortion) Nominal load impedance 16 Ω to 600 Ω 1) If the sampling frequency of the input signal is 32 kHz, no frequency indicator lights, but the input indicator does. 2) The maximum is 96 kHz when using the optical digital input. 3) Only during USB input 16