TEAC US-2000 US-2000 Owner's Manual - Page 15

6 - Application Guide In this chapter, we explain how to set some audio applications for use with this unit. Windows XP and Windows Media Player 1 Close all applications and then open the "Control Panel" from the "Start" menu. 2 Open "Sounds and Audio Devices." NOTE If you do not see either of the items above, click "Sounds, Speech, and Audio Devices" and one will appear. 3 Click the "Audio" tab, and set the "Default device:" for "Sound playback" to "TASCAM US-2000." Windows Vista and Windows Media Player 1 Close all applications and then open the "Control Panel" from the "Start" menu. 2 Open "Sound." NOTE If the above item does not appear, click "Hardware and Sound" and it will appear. 3 Click the "Playback" tab, click "Speakers TASCAM US-2000" and click the "Set Default" button. This moves the green check mark to "Speakers TASCAM US-2000." 4 Click "OK." 5 Start Windows Media Player, select an audio file and begin playback. NOTE • If you change the setting while Windows Media Player is running, the software will not recognize that the device has been changed. In this case, restart Windows Media Player. • If you still cannot hear sound after making the settings and completing the procedures above, restart the computer. • If you make this setting, sound will be output through this unit, but no sound will be output by the computer's speakers or headphone jack. 4 Click "OK." 5 Start Windows Media Player, select an audio file and begin playback. NOTE • If you change the setting while Windows Media Player is running, the software will not recognize that the device has been changed. In this case, restart Windows Media Player. • If you still cannot hear sound after making the settings and completing the procedures above, restart the computer. • If you make this setting, sound will be output through this unit, but no sound will be output by the computer's speakers or headphone jack. 15 TASCAM US-2000