TEAC US-2000 US-2000 Owner's Manual - Page 5
Introduction - tascam usb audio interface
View all TEAC US-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 − Introduction Thank you for your purchase of the TASCAM US-2000 USB 2.0 Audio Interface. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the unit, as well as the operation of its many useful and convenient functions. After you have finished reading this manual, please keep it in a safe place for future reference. You can also download the Owner's Manual from the TASCAM web site (http://www.tascam.com). Main features • Audio interface with 16 inputs and 4 outputs • 24-bit/96-kHz audio • 14 balanced analog inputs include 6 XLR for mics, 2 combined XLR/TRS and 6 line • S/PDIF digital input • +48V phantom power can be provided (to 8 mic inputs) • Inputs 1-14 can be monitored individually in mono or in stereo as pairs of channels • Outputs include 4 balanced line, a balanced pair for monitors, digital and headphone • S/PDIF or AES/EBU selectable digital output • 5-dot meter for every input and output • Direct monitoring function allows input monitoring without latency • In addition to a monitor level control, independent level control is possible for the signals input from a computer by USB and through the unit's input jacks • Input 7 and 8 have insert jacks • Can be used with multiple software clients at the same time even if some use ASIO and other use WDM for audio control • USB 2.0 High speed (480 MHz) compatible • Cubase LE4 included A note about computer operation If you are unsure about how to perform basic computer operations appearing in this manual, please refer to the owner's manual that came with your computer. Included items The included items are listed below. Take care when opening the package not to damage the items. Keep the package materials for transportation in the future. Please contact the store where you purchased this unit if any of these items are missing or have been damaged during transportation. • Main unit 1 • Power cord 1 • USB cable 1 • CD-ROM (containing driver and manuals 1 • DVD-ROM (Cubase LE4 1 • Cubase LE4 Quick Start Guide 1 • A rack-mounting screw kit 1 • A warranty card 1 • Owner's manual (this manual 1 About this manual In this manual, we use the following conventions: • The names of keys and controls are given in the following typeface: MONO. • Messages on the unit's display are shown with quotation marks like this: "Message" • Additional information is introduced in the styles below when needed: TIP Useful hints when using the unit. NOTE Explanation of actions in special situation and supplement. CAUTION Instructions that should be followed to avoid injury, damage to the unit or other equipment, and loss of data. 5 TASCAM US-2000