TP-Link Archer D7b User Guide - Page 32
Static IP, VPI 0~255, VCI 1~65535, Enable Vlan, ATM Configuration
View all TP-Link Archer D7b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Archer D7b AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide 4.5.1.1 Static IP Select this option if your ISP provides static IP information to you. You should set static IP address, IP subnet mask, and gateway address in the screen below. Figure 4-5 ATM Configuration: VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP. VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by your ISP. Enable Vlan:Check the box to enable Vlan. 21
Archer
D7b
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide
21
4.5.1.1 Static IP
Select this option if your ISP provides static IP information to you. You should set static IP address,
IP subnet mask, and gateway address in the screen below.
Figure 4-5
ATM Configuration:
VPI (0~255):
Identifies the virtual path between endpoints in an ATM network. The valid range
is from 0 to 255. Please input the value provided by your ISP.
VCI (1~65535):
Identifies the virtual channel endpoints in an ATM network. The valid range is
from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
Enable Vlan
:
Check the box to enable Vlan.