TP-Link Archer D7b User Guide - Page 41
LAN Settings, Remove, Network, LAN Settings
View all TP-Link Archer D7b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Archer D7b AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide want to active Interface Grouping function, please check the box to enable the Virtual LAN Ports feature. Note: It is not allowed to disable the VLAN with Ethernet Connection enabled. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button. The Remove button will remove the grouping and add the ungrouped interfaces to the Default group. Only the default group has IP interface. Click the Add button. You can add a new interface group in the next screen. For example, you want LAN1 and LAN3 to be a group called Group 1 over br_8_35_0 WAN interface, you can refer to the following figure. Figure 4-12 Click Save to make the entry effective immediately 4.5.3 LAN Settings Choose "Network""LAN Settings" menu, and you will see the LAN screen (shown in Figure 4-13). Please configure the parameters for LAN ports according to the descriptions below. 30