TP-Link Archer D7b User Guide - Page 39
IP Address/Subnet Mask, DNS Server/Secondary DNS Server, Default Gateway, 5.1.6 Bridge
View all TP-Link Archer D7b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Archer D7b AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide Figure 4-9 IP Address/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP. If you forget, you can ask your ISP. DNS Server/Secondary DNS Server: Type in your preferred DNS server. Default Gateway: select a WAN Interface from the drop-down list as the IPv4 default gateway. 4.5.1.6 Bridge If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN. 28
Archer
D7b
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide
28
Figure 4-9
IP Address/Subnet Mask:
Enter the IP Address and Subnet Mask provided by ISP. If you
forget, you can ask your ISP.
DNS Server/Secondary DNS Server:
Type in your preferred DNS server.
Default Gateway:
select a WAN Interface from the drop-down list as the IPv4 default
gateway.
4.5.1.6 Bridge
If you select this type of connection, the modem can be configured to act as a bridging device
between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.