TP-Link Archer D7b User Guide - Page 89
IPv6 Route Settings, 4.13.1 IPv6 Default Gateway, 4.13.2 IPv6 Static Route
View all TP-Link Archer D7b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Archer D7b AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router (Annex B) User Guide Figure 4-67 Note: RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 4.13 IPv6 Route Settings Choose "IPv6 Route Settings", it includes four menus: IPv6 Default Gateway and IPv6 Static Route. The detailed descriptions are provided below. 4.13.1 IPv6 Default Gateway Choose "IPv6 Route Settings""IPv6 Default Gateway", you can see the Default Gateway screen. You can select a WAN Interface from the drop-down list as the system default gateway. Figure 4-68 Click the Add Interface button, you can add WAN Interfaces. Click the Save button to save your settings. 4.13.2 IPv6 Static Route Choose "IPv6 Route Settings" "IPv6 Static Route". You can see the IPv6 Static Route screen. This screen allows you to configure the IPv6 static routes (shown in Figure 4-69). An IPv6 static route is a pre-determined path that network information must travel to reach a specific host or network. Figure 4-69 To add a new entry, follow the instructions below. 1. Click the Add New button in Figure 4-69, and you will see the screen as shown in Figure 4-70. 78