TP-Link CPE710 CPE710UN V1 Installation Guide - Page 15
the strap to the pole., achieve maximum signal strength. - range
View all TP-Link CPE710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
b. Wrap the metal strap around the pole. Use a socket wrench or screwdriver to turn the screw clockwise and securely fasten the strap to the pole. Note: Suitable pole diameters range from 15mm to 70mm. 8. Adjust the azimuth and elevation angle of the CPE device to achieve maximum signal strength. 13
13
b.
Wrap the metal strap around the pole. Use a socket wrench or
screwdriver to turn the screw clockwise and securely
fasten
the strap to the pole.
Note:
Suitable pole diameters range from 15mm to 70mm.
8. Adjust the azimuth and elevation angle of the CPE device to
achieve maximum signal strength.