TP-Link CPE710 CPE710UN V1 Installation Guide - Page 21

d. Select the MAXtream checkbox (Refer to Q3 in FAQ for details about MAXtream), and click Next. 5. Finish: Verify your settings and click Finish to complete the configuration. •• Configure the Client 1. Log in to PharOS and go to the Quick Setup page. 2. Operation Mode: Select Client and click Next. 3. LAN Settings: Change the IP Address to 192.168.0.X (X ranges between 2 and 253), the same subnet as the access point, and click Next. 4. Wireless Client Settings: a. Click Survey and select the SSID of the Access Point in the AP list, then click Connect. b. Select WPA-PSK/WPA2-PSK from the Security option, enter the same PSK password and distance value of the Access Point, then click Next. 5. Finish: Verify your settings and click Finish to complete the configuration. For more configurations, please visit https://www.tp-link.com/support to download the User Guide of Pharos products in the download center. 19