TP-Link CPE710 CPE710UN V1 Installation Guide - Page 20

4. Change the default User Name and Password for security purposes. You can then start to configure your CPE. Note: For subsequent logins, use the new username and password. For more configurations, please visit https://www.tp-link.com/support to download the User Guide of Pharos products in the download center. Configuration for a Typical Application The typical topology is as follows: Multiple wireless bridges are built among the access point and the clients. Follow the instructions below to configure the Access Point and the Clients. For simplicity, we will take one wireless bridge as an example. Access Point Client Client Client •• Configure the Access Point (AP) 1. Log in to PharOS and go to the Quick Setup page. 2. Operation Mode: Select Access Point and click Next. 3. LAN Settings: Click Next. 4. Wireless AP Settings: a. Create a new SSID (Network name) for your wireless network. b. Select WPA-PSK/WPA2-PSK for the Security method and create a PSK Password to protect your AP. c. Enter the distance between the Access Point and the Client into the Distance Setting field. 18