TP-Link TL-WR842ND TL-WR842ND FTP Server Application Guide for USB function - Page 13
LAN Access, Start, Default Gateway
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Application Guide 3.2 LAN Access 1. Go to Start->Run, input cmd as below, then click OK or press Enter key. 2. You will see the interface as below. Figure 3-9 Figure 3-10 3. Input ipconfig, and press Enter key. Write down the IP address behind Default Gateway as shown in Figure 3-11. (Here is 192.168.0.1). - 12 -
Application Guide
- 12 -
3.2
LAN Access
1. Go to
Start-
>
Run
, input
cmd
as below, then click
OK
or press
Enter
key.
Figure 3-9
2. You will see the interface as below.
Figure 3-10
3. Input
ipconfig
, and press
Enter
key. Write down the IP address behind
Default Gateway
as
shown in Figure 3-11. (Here is 192.168.0.1).