Thermador HMCN42FS User Manual - Page 8

CARE AND CLEANING ṇ WARNING To avoid risk of fire and explosion do not use flammable liquids or solvents. Always unplug or disconnect the appliance from the power supply before servicing. IMPORTANT: Do not clean the hood with abrasive sponges or with cleaning agents which contain sand, soda, acid or chlorine! ❑ Clean the hood with a hot soap solution or a mild window cleaner. ❑ Do not scrape off dried-on dirt but wipe off with a damp cloth. ❑ When cleaning the grease filters, remove grease deposits from accessible parts of the housing. This prevents the risk of fire and ensures that the hood continues operating at maximum efficiency. ❑ Note: Do not use alcohol (spirit) on plastic surfaces, as dull marks may appear. Caution: Observe all instructions and cautions provided with cleaners. IMPORTANT: Clean the operating buttons with a mild soapy solution and a soft, damp cloth only. Do not use stainless-steel cleaner to clean the operating buttons. Stainless steel surfaces: ❑ Use a mild non-abrasive stainless steel cleaner. ❑ Clean the surface in the same direction as it has been ground and polished. ❑ We recommend the stainless steel cleaner Fantastik® or Formula 409® sprayed onto a paper towel. Aluminum and plastic surfaces: ❑ Do not use dry cloths. ❑ Use a mild window cleaning agent. ❑ Do not use aggressive, acidic or caustic cleaners. Observe the warranty regulations in the enclosed service booklet. 8