Toro 20333 Operation Manual - Page 11

Bagging the Clippings Use the grass bag when you want to collect grass and leaf clippings from the lawn. Note: Ensure the bag is seated in the correct position. Installing the Grass Bag 1. Raise and hold up the rear deflector (Figure 19). WARNING A worn grass bag could allow small stones and other similar debris to be thrown in the operator's or bystander's direction and result in serious personal injury or death to the operator or bystanders. Check the grass bag frequently. If it is damaged, install a new Toro replacement bag. If the side discharge chute is on the mower, remove it (refer to Removing the Side Discharge Chute) before bagging the clippings. If the bag-on-demand lever is in the recycling position, move it to the bagging position (refer to Operating the Bag-on-Demand Lever). WARNING The blade is sharp; contacting the blade can result in serious personal injury. Stop the engine and wait for all moving parts to stop before leaving the operating position. 1. Notches 2. Rear deflector Figure 19 3. Grass bag pin (2) 2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (Figure 19). 3. Lower the rear deflector. Removing the Grass Bag To remove the bag, reverse the steps above. 11