Toshiba 36AF42 Owners Manual - Page 35
Appendix, Troubleshooting
View all Toshiba 36AF42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Welcome to Toshiba Connecting your TV Using the Remote Control Setting up your TV Appendix Troubleshooting Before calling a service technician, please check the following table for possible causes of the problem and some solutions. Problem TV will not turn on Solution • Make sure the power cord is plugged in, and then press POWER. • The remote control batteries may be dead. Replace the batteries or press the POWER button on the TV. No picture, no sound • Check the antenna/cable connections. No sound, picture OK • The sound may be muted. Press MUTE or VOLUME y z. • The station may have broadcast difficulties. Try another channel. Poor sound, picture OK • The station may have broadcast difficulties. Try another channel. Poor picture, sound OK • Check the antenna connections. • The station may have broadcast difficulties. Try another channel. • Adjust the PICTURE menu. Poor reception of broadcast channels • Check the antenna connections. • The station may have broadcast difficulties. Try another channel. • If you are using a VCR, make sure the TV/VCR button is set correctly. Cannot receive above channel 13 • Make sure the TV/CABLE feature in the SET UP menu is set to TV. Unable to select a certain channel • The channel may be locked out with the Block Channel feature (SET UP/V-Chip Control menu), or erased with the Add/Erase feature (SET UP menu). Multiple images • The station may have broadcast difficulties. Try another channel. • Use a highly directional outdoor antenna. Poor color or no color • The station may have broadcast difficulties. Try another channel. • Adjust the TINT and/or COLOR in the PICTURE menu. • If you change the direction of the TV while it is turned on, the picture could suffer from color shading. If so, turn the TV off and allow it to cool down for several hours before turning it on again. No stereo or SAP sound from a known MTS broadcast • Make sure the MTS feature is set properly (AUDIO menu). The remote control does not operate • Make sure the TV/CABLE/VCR switch is set properly. • There may be an obstruction between the remote control and the remote control sensor on the TV. • The remote control batteries may be dead. Replace the batteries. The V-Chip PIN code does not work • Change or reset the PIN code. Using the TV's Features Appendix 35