Toshiba 52HMX94 Owner's Manual - English - Page 24
IEEE-1394 device management - user manual
UPC - 022265262184
View all Toshiba 52HMX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 2: Connecting your TV Connecting IEEE-1394 video devices (continued) IEEE-1394 device management The IEEE-1394 device information is saved in the TV's memory. You can edit this device information (for example, to edit the device name, change the analog input information, or delete the device information from the TV's memory if you no longer use that device). To edit the IEEE-1394 device information: 1. Press MENU and open the SETUP menu. 2. Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below). 3. Open the DEVICES menu, highlight IEEE-1394 DEVICES, and press ENTER. Devices IEE-1394 Devices TheaterNet Devices Navigate Select DVD RTN CH RTN Back EXIT Exit 4. Highlight the device you want to edit and press ENTER. Important information regarding IEEE-1394 device interconnection Note: • Do not loop the last device in the chain back to the TV. If the device chain is looped, the TV may not work properly with the other devices in the chain. • Place devices with the slowest communication speed at the end of each chain. If a device with a slower communication speed is placed ahead of a faster device in the chain, the signal from the slower device will interfere with the signal from the faster device. To determine the communication speed of an IEEE-1394 device, look for an "S" number near the device's IEEE-1394 connector. The higher the "S" number, the faster the device. If your device is not marked with an "S" number, look in the device's user manual or call the device manufacturer's technical support number. • If your IEEE-1394 device has a two-position power switch, place the device at the end of the chain or leave the power switch ON at all times. If the power switch is OFF, it will interfere with signals from devices behind it in the chain. • The maximum length for an IEEE-1394 cable between each device is 15 feet. • This TV is an IEEE-1394A device. The IEEE-1394B protocol is faster and intended to allow for longer distances between devices and multi-room systems. IEEE-1394A-to-IEEE-1394B converters (available at some electronics suppliers) may allow compatibility of IEEE-1394B devices with your existing IEEE-1394A devices. • The transmission capability of IEEE-1394 cable used with this TV must be S400 (400 Mbps maximum). 5. Follow the on-screen prompts to modify the device information. 24 HMX94(E)012-25(2B-Cnct) 24 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 9/28/04, 1:35 PM