Toshiba 52HMX94 Owner's Manual - English - Page 66
Using the TV's features
UPC - 022265262184
View all Toshiba 52HMX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
8 Using the TV's features Selecting the video input source to view To select the video input source to view: 1. Press INPUT on the remote control or TV/VIDEO on the TV front panel. 2. Press 0-7 to select the input source you want to view, depending on which input jacks you used for connecting your devices (see Chapter 2). The current signal source displays in the top right corner of the INPUT SELECTION screen. ACTION MENU +10 - 100 ENTER Numbers INPUT y z Note: • While the Input Selection screen is open, you also can use the yz buttons on the remote control (or the Channel yz buttons on the front panel) to change the input. CT-90216 • While the Input Selection screen is not open, you can repeatedly press the INPUT button on the remote control or the TV/VIDEO button on the TV front panel to change the input. Remote control • To select an IEEE-1394 input source, press the TheaterNet DEVICE button on the remote control (see page 26 & 44). • If an IEEE-1394 device is the current input, it will appear at the bottom of the Input Selection list; however, it will be removed from the list if the input source is changed. TV/VIDEO { CHANNEL zy • You can label the video input sources according to the specific devices you have connected to the TV (see next page). • The source can be "hidden." See page 67 for details. • If you use the TV's remote control to start recording, you will not be able to change inputs during recording. If you use a device other than the TV's remote control to start recording and then change inputs, the recorded audio and video may be affected. TV/VIDEO EXIT TV front touchpad CHANNEL VOLUME MENU POWER 66 HMX94(E)066-75(8a-UseTV) 66 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 9/28/04, 11:00 AM