Toshiba 52RV530U Owner's Manual - English - Page 54

Displaying TV status information, Understanding the auto power off, feature, Understanding the last

Page 54 highlights

Chapter 6: Using the TV's features Displaying TV status information To display TV status information using RECALL: Press E on the remote control. The following information will display (if applicable): • Current input (ANT/CABLE, Video 1, etc.) • If ANT/CABLE is the current input, either "CABLE" (for cable TV) or "ANT" (for over-the-air broadcasts). • Channel number (if in ANT/CABLE mode) • Channel label (if set) • Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only) • Stereo, Mono or SAP audio status (when HDMI input mode, Dolby Digital or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status • GameTimer (if set) ANT 2-2 WEATHER Stereo 480i 4:3 None Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT/CABLE mode only. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. Note: If it's possible, and you will be away from the TV for an extended period of time you should unplug the power cord. To close the RECALL screen: Press E again. To display TV status information using INFO: (only available for ANT/CABLE input) Press Q on the remote control. The following additional information will display for off air digital channels (if applicable): • Title • Duration • Detailed description To display Next information, press Q on the remote control again. Pressing Q a third time will remove the entire banner. ANT 2-2 WEATHER Stereo 480i 4:3 None Nashville WX Channel 8:59am - 4:59pm EST Nashville WX Channel provides Middle Tenessee and Southern Kentucky weather. Note: The location of the banner can be moved to the top or bottom of the screen by pressing B or b while the RECALL or INFO display is on-screen. (The last position will be stored to memory.) 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

54
Chapter 6: Using the TV’s features
Displaying TV status information
To display TV status information using RECALL:
Press
E
on the remote control.
The following information will display (if applicable):
Current input (
ANT/CABLE
,
Video 1
, etc.)
If ANT/CABLE is the current input, either “CABLE” (for
cable TV) or “ANT” (for over-the-air broadcasts).
Channel number (if in
ANT/CABLE
mode)
Channel label (if set)
Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signal only)
Stereo, Mono or SAP audio status (when HDMI input mode,
Dolby Digital or PCM)
Video resolution
Aspect ratio of incoming video signal (4:3 or 16:9)
V-Chip rating status
GameTimer (if set)
To close the RECALL screen:
Press
E
again.
To display TV status information using INFO:
(only available for ANT/CABLE input)
Press
Q
on the remote control.
The following additional information will display for off air
digital channels (if applicable):
Title
Duration
Detailed description
To display Next information, press
Q
on the remote control
again. Pressing
Q
a third time will remove the entire banner.
Note:
The location of the banner can be moved to the top or
bottom of the screen by pressing
B
or
b
while the RECALL or
INFO display is on-screen. (The last position will be stored to
memory.)
Understanding the auto power off
feature
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT/CABLE
mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the TV
when the power is resupplied.
Note:
If it’s possible, and you will be away from the TV for an
extended period of time you should unplug the power cord.
2-2
ANT
WEATHER
Stereo
None
480i
4:3
2-2
ANT
Nashville WX Channel
Nashville WX Channel provides Middle Tenessee and Southern Kentucky
weather.
8:59am - 4:59pm EST
Stereo
480i
4:3
WEATHER
None