Toshiba 55A10 Owners Manual - Page 9

Introduction Connecting your TV Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. You will need: • one pair of audio cables • one video cable Camcorder VIDEO AUDIO OUT L R Caution: If you are using an S-VHS camcorder with an S-video output, connect this to the S-video input on the TV and omit the video cable. Do not connect the video cable and the S-video cable to Video-3 simultaneously. TV Using the Remote Control Setting up your TV Using the TV's Features Appendix Connecting an audio system This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, then turn off the built-in speakers (see "Turning off the built-in speakers" on page 40). You will need one pair of audio cables. Amplifier Note: To hear the audio, the volume of both the TV and the external audio amplifier must be set above minimum (zero). For example, if you set the volume of the TV to zero, you will not be able to hear any audio, even if you adjust the volume of the amplifier to its maximum setting. From Cable, Cable Box or Antenna LINE IN LR TV AUDIO CENTER CHANNEL IN ANT( 75 ) ANT-1 S-VIDEO ON OFF OUT OUT R L VAR AUDIO ANT-2 Y VIDEO L/ MONO CB L AUDIO R AUDIO CR COLOR R VIDEO 1 VIDEO 2 STREAM INPUT IN DVD IN VIDEO L/ MONO AUDIO R OUT 9 Index