Toshiba 57HDX82 User Manual - Page 14

Introduction Connecting your TV Using the Remote Control Connecting a device to the IR blaster The IR blaster allows you to remotely operate (through the TV) most infrared-controlled devices* (such as a Toshiba infraredcontrolled VCR or DVD player) enclosed within an entertainment center or similar cabinet. Without the IR blaster, the device typically would need to be visible to operate it remotely. You can use the TV's remote control (programmed to operate the device; see pages 17-23) or the device's remote control. Point the remote control at the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR blaster cable (included with your TV). To connect, align the IR blaster cable's infrared "eye" with the device's infrared sensor and attach it using double-sided mounting tape (included with the cable in the accessory pack). Plug the other end of the IR blaster cable into the TV's IR BLASTER OUT terminal. You will need: • one IR blaster cable (included) • one piece of double-sided mounting tape (included) IR blaster cable's infrared "eye" facing device's infrared sensor Front of infrared-controlled device* (such as a Toshiba infrared-controlled VCR or DVD player) Back of TV IR BLASTER OUT IN AUDIO CENTER CHANNEL IN DVI / HDCP IN S-VIDEO OUT VAR. AUDIO R L ON OFF IN DVI/HDCP R L VIDEO Y VIDEO Y ANT( 75 ) L/ MONO L/ PB L MONO PB L AUDIO R PR R R COLOR VIDEO-1 VIDEO-2 STREAM AUDIO HD 1 IN IN AUDIO OUT AUDIO PR R COLOR STREAM HD 2 IN ANT-1 OUT ANT-2 For additional control options for your home theater system, you can connect an IR receiver/repeater (not included) or a home theater control system (not included) to the TV's IR BLASTER IN terminal.* See the Specifications section in the back of this manual for IR BLASTER IN terminal requirements. Contact your home theater electronics dealer for details about home theater control systems. Back of TV IR BLASTER OUT IN AUDIO CENTER CHANNEL IN DVI / HDCP IN S-VIDEO OUT VAR. AUDIO R L ON OFF IN DVI/HDCP R L VIDEO Y VIDEO Y ANT( 75 ) L/ MONO L/ PB L MONO PB L AUDIO R PR R R COLOR VIDEO-1 VIDEO-2 STREAM AUDIO HD 1 IN IN AUDIO OUT AUDIO PR R COLOR STREAM HD 2 IN ANT-1 OUT ANT-2 OUT IN Back of IR receiver/ repeater or home theater control system* (not included) Setting up your TV Using the TV's Features Appendix With this connection, point the Toshiba TV remote control at the front of the TV to operate both the TV and the infrared-controlled device. (You also can point the device's remote control at the TV to operate the device, but you also will need to use the TV's remote CT-90121 control to operate the TV.) IR receiver/repeater or home theater control system CT-90121 With this connection, point the Toshiba TV remote control at the front of the IR receiver/ repeater or home theater control system to operate the TV. ___________ *The IR blaster OUT function has been verified for use with Toshiba infrared-controlled devices. The IR blaster IN function has been verified for use with SmarTouch™ STS/STS-C wireless RF control systems. Due to the wide variation in remote control operation among manufacturers, these functions may or may not operate with other brands. SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com). 15 Index