Toshiba MW24F52 User Manual - Page 20

Clock setting

Get Toshiba MW24F52 PDF manuals and user guides View all Toshiba MW24F52 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Basic setup Clock setting The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself. Auto clock setting To set auto clock to OFF Preparation: • Connect the antenna or cable system. • If you use a cable box, turn it on. • Plug the AC power cord to the AC outlet. When shipped from factory the AUTO CLOCK is set to "ON". But if you do not want auto clock set (Adjustment): 1 Press MENU, then press or to select option. 1 Make sure the unit is turned off. • If you press POWER, the Auto Clock set is not effective. 2 Wait at least three minutes and press POWER. • Depending on the reception condition, it may take approx. thirty minutes. POWER • The POWER indicator will light. 3 Press TV/VCR to select TV/VCR mode. Then press DISPLAY to check the clock on the screen. TV/VCR 8 : 47AM MON STEREO SAP CH 125 CLOCK SET ON/OFF TIMER AUTO CLOCK ON STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU 2 Press or to select "AUTO CLOCK". CLOCK SET ON/OFF TIMER AUTO CLOCK ON STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU 3 Press or to select "OFF". 00 : 00 : 00 SP 4 If the clock is not set, check the antenna condition. The Auto clock may not function properly if the reception condition is not good. Auto clock adjustment The Auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit. • If you use a cable box and you want Auto Clock adjust- ment to be performed, the cable box must be left on. • The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time. CLOCK SET ON/OFF TIMER AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU OFF 4 Press MENU repeatedly until the menu screen is cleared. • When the AUTO CLOCK is set to "OFF", the Auto Clock adjustment does not function. • Set the clock manually . Notes: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • The TV section has its own menu and also DVD section has its own menu $ . • If no buttons are pressed for more than 60 seconds, the TV/VCR menu screen will return to normal TV operation automatically. 20 5W70101A [E]p19-22 20 30/1/06, 2:29 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
20
Basic setup
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit
is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
•
Connect the antenna or cable system.
•
If you use a cable box, turn it on.
•
Plug the AC power cord to the AC outlet.
Auto clock setting
Make sure the unit is turned off.
•
If you press
POWER
, the Auto Clock
set is not effective.
1
Wait at least three minutes and press POWER.
2
Press TV/VCR to select TV/VCR mode. Then
press DISPLAY to check the clock on the
screen.
3
If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.
4
Auto clock adjustment
To set auto clock to OFF
The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want Auto Clock adjust-
ment to be performed, the cable box must be left on.
• The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press MENU, then press
or
to select
option.
1
Press
or
to select “AUTO CLOCK”.
2
Press
or
to select “OFF”.
3
Press MENU repeatedly until the menu
screen is cleared.
• When the AUTO CLOCK is set to
“OFF”, the Auto Clock adjustment
does not function.
• Set the clock manually
.
4
POWER
Notes:
•
If the unit does not operate properly, or No key operation
(by the unit and/or the remote control):
Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
•
The TV section has its own menu and also DVD section has
its own menu
.
•
If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.
• Depending on the reception
condition, it may take approx. thirty
minutes.
• The POWER indicator will light.
5W70101A [E]p19-22
30/1/06, 2:29 PM
20