Toshiba Qosmio G25-AV513 User Manual - Page 65

Getting Started Installing additional memory (optional) 65 You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory. If you are adding extra memory after setting up the computer, verify that the computer has recognized it correctly as described in "Checking total memory" on page 66. Removing a memory module To remove the memory module: 1 Turn the computer off and remove all cables connected to the computer, including the AC adapter cable. Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Stand By mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Stand By configuration will not be saved. The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for at least ten seconds, then turn the power on again. 2 Close the display panel and turn the computer upside down and remove the main battery module. 3 Loosen the screw that secures the memory slot cover, then remove the memory slot cover.