Toshiba Satellite Pro U400-S1001X User Guide - Page 180
Printer problems, The system does not recognize your ExpressCard, An ExpressCard, error occurs.
View all Toshiba Satellite Pro U400-S1001X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
180 If Something Goes Wrong Resolving a hardware conflict 2 Click Safely remove for the device you want to swap. 3 Select the item you wish to remove and click OK. 4 Remove the device when told it is safe to do so. Never swap modules when the computer is in Hibernation or Standby mode. This is known as "warm swapping" and is not supported. For more information on Hibernation and Standby modes see "Hibernation mode" on page 73 and "Standby mode" on page 74. The system does not recognize your ExpressCard®. Refer to the ExpressCard® documentation. Removing a malfunctioning card and reinstalling it can correct many problems. An ExpressCard® error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card's documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems. The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to the computer and the printer. Run the printer's self-test to check for any problem with the printer itself. Make sure you installed the proper printer drivers as shown in "Setting up a printer" on page 70 or in the instructions that came with the printer.