Toshiba W-804 Owners Manual - Page 30

RECORDING Timer Program Recording The programmable timer allows you to record up to 6 different programs over one month. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Make sure that the clock is set correctly (page 17). • Store the channels on the VCR (pages 18 and 19). • If you record cable channels, finish the cable box set-up (pages 37 - 40), and turn on the cable box. • If you record satellite channels, finish the DSS® satellite receiver set-up (pages 41 - 43), and turn on the DSS® satellite receiver. 123 456 789 0 100 PLAY/x2 REW ENTER FF STOP VCR Plus+ DNR A.SELECT POWER REMAIN COUNTER CH DOWN COUNT RESET CH UP 4 CANCEL PLAY/x2, STOP FF ENTER REW 10 2, 9 Timer Programming Procedure Example: To record cable channel 25 in the SP tape speed from 9:30 p.m. until 10:00 p.m. on August 30. Today is August 25. 1 Load a cassette with the safety tab attached. 2 Press PROG. to display the MENU screen. 3 Select "PROGRAM" using FF or REW, and press ENTER. PROGRAM SET UP PRESET CH DATE On OFF SPD EnD: PROG 4 Move to the next using FF, and enter the channel number 25 by using PLAY/x2, STOP or number buttons. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 SLP EnD: PROG • To record a cable program from the connected cable box: Enter the cable channel number by number buttons, PLAY/x2 or STOP. If your cable box is not remote-controllable, choose the desired channel (1 to 125) on the cable box. • To record a satellite program from the connected DSS® satellite receiver: Enter the satellite channel number (100 to 999) by number buttons, PLAY/x2 or STOP. (If a number 1 to 99 is entered, the VCR will record a TV/CATV program on the channel, not a satellite's.) If your DSS® satellite receiver is not remote-controllable, choose the desired channel (100 to 999) on the DSS® satellite receiver. To make corrections: Press REW to move back to the item, or FF to forward. 30