Toshiba W528 Owners Manual - Page 17

PREPARATION PREPARATION Storing Channels on the VCR This section is required if you receive only normal TV or unscrambled cable channels. Incoming Antenna/Cable(CATV) Signals The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 12). • Press I.SELECT so that the channel number will appear if "L1 / L2"( For W-528/W-522 only ) or "L"( For W-422 only) is displayed in the VCR display. VCR TV POWER 1 23 45 78 A.SELECT 0 6 CM SKIP 9 100 EJECT PLAY REW FF ENTER STOP SLOW PAUSE/STILL REMAIN/ COUNT DISPLAY COUNTER RESET SP/ SLP I.SELECT REC TIMER TV VOL PROG. CANCEL Incoming Antenna/Cable(CATV) Signals Number buttons 100 REW 1 Press PROG. to display the MENU screen. 2 Select "PRESET" using FF or REW, and press ENTER. FF PLAY, STOP ENTER 1,6 I.SELECT 3 Select "CH MEMORY" using PLAY or STOP, and press ENTER. 4 Set "TV/CATV" to "TV" or "CATV" using FF or REW. TV: To store channels received via the antenna. CATV: To store channels received via the incoming cable. 5 Select "AUTO SCAN" using PLAY or STOP, and press FF to set to "ON". The VCR starts scanning and the channels are stored in the VCR in ascending order. When the scanning is finished, the screen automatically returns. 6 Press PROG. twice to exit. 17