Toshiba W528 Owners Manual - Page 20

PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Basic Playback VCR TV POWER 1 Load a recorded cassette. TIMER 1 23 Power is turned on. SLP S 456 CH/TRK If the cassette has no safety tab, VCR REC L CM SKIP 7 89 playback starts automatically. A.SELECT 0 100 2 2 Press PLAY to start playback. ST EJECT PLAY REW FF ENTER FF VCR L STOP 3 3 To stop playback, press STOP. SLOW PAUSE/STILL REMAIN/ COUNT DISPLAY COUNTER RESET SP/ SLP I.SELECT REC TIMER REW VCR TV VOL PROG. CANCEL Double Speed Playback 1 Press PLAY during playback. A tape runs at double speed playback. To resume normal playback Press PLAY. Rewinding / Fast-forwarding Press REW or FF in the stop mode. Adjusting the tracking When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound (Digital Auto Tracking). If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the tracking manually. Notes • During the adjusting, the playback picture and sound may be distorted. • The digital auto tracking is activated only in the playback mode. • The noise on the screen may not be completely eliminated depending on the tape used, especially when the tape was recorded on another VCR. S-VHS Quasi Playback (SQPB) • This VCR can also play back at tape which is recorded in S-VHS format. But the playback pictures does not have the same quality and resolution as the original S-VHS playback picture. • This VCR cannot record in S-VHS format. • SQPB is an abbreviation for S-VHS Quasi Playback. 20