Tripp Lite 5PX1000RTNG2 Owners Manual for 5PX1000RTG2 5PX1000RTNG2 5PX1500RTG2 - Page 13

Connecting the internal battery, EBM connection, connected to the UPS.

Get Tripp Lite 5PX1000RTNG2 PDF manuals and user guides View all Tripp Lite 5PX1000RTNG2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

3.3 Connecting the internal battery A small amount of arcing may occur when connecting the internal batteries. This is normal and will not harm personnel. Connect the cables quickly and firmly. 1. Remove the front panel by pressing on both sides of the panel. 2. Connect the two battery connectors together. 3. Replace the front panel. 3.4 EBM connection Tour installation A small amount of arcing may occur when connecting an EBM to the UPS. This is normal and will not harm personnel. Insert the EBM cable into the UPS battery connector quickly and firmly. 1. Attach the UPS and the EBMs to each other using the supplied mounting plate. Up to 4 EBMs may be connected to the UPS. 2. Connect the EBMs power cable and the attached battery detection cable as shown in the picture. 3. Verify that the EBM connections are tight and that adequate bend radius and strain relief exist for each cable. 614-40095-00 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
614-40095-00
13
1.
2.
3.
3.3 Connecting the internal battery
A small amount of arcing may occur when
connecting the internal batteries. This is normal and will
not harm personnel. Connect the cables quickly and
firmly.
Remove the front panel by pressing on both sides of
the panel.
Connect the two battery connectors together.
Replace the front panel.
3.4 EBM connection
Tour installation
A small amount of arcing may occur when
connecting an EBM to the UPS. This is normal and will
not harm personnel. Insert the EBM cable into the UPS
battery connector quickly and firmly.
1. Attach the UPS and the EBMs to each other using the
supplied mounting plate. Up to 4 EBMs may be
connected to the UPS.
2. Connect the EBMs power cable and the attached
battery detection cable as shown in the picture.
3. Verify that the EBM connections are tight and that
adequate bend radius and strain relief exist for each
cable.