Tripp Lite 5PX1000RTNG2 Owners Manual for 5PX1000RTG2 5PX1000RTNG2 5PX1500RTG2 - Page 16
HotSwap MBP module operation, receptacle UPS Input 47 of the HotSwap MBP
View all Tripp Lite 5PX1000RTNG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
HotSwap MBP module operation 1. Connect the input socket (48) on the HotSwap MBP module to the AC power source. 2. Connect the UPS input power cord (13) to the receptacle "UPS Input" (47) of the HotSwap MBP module. 3. Connect the "UPS Output" cable (46) of the HotSwap MBP module to the outlet (3) of the UPS . 4. Connect the equipment to the outlets (42) on the HotSwap MBP module. These outlets differ, depending on the version of the HotSwap MBP module. Caution : Do not use UPS outlets (4) to supply equipment because use of switch (45) on the HotSwap MBP module would cut supply to the equipment. The HotSwap MBP module has a rotary switch (45) with two positions: Normal : the load is supplied by the UPS, LED (43) is on. Bypass : the load is supplied directly by the AC power source. LED (44) is on. Load is not protected. UPS start-up with the HotSwap MBP module 1. Check that the UPS is correctly connected to the HotSwap MBP module. 2. Start the UPS by pressing the button on the UPS control panel. LED (43) "UPS ON - OK to switch" on the HotSwap MBP module goes ON (otherwise, there is a connection error between the HotSwap MBP module and the UPS). 3. Set switch (45) to Normal position. The red LED on the HotSwap MBP module goes OFF. HotSwap MBP module test 1. Set switch (45) to Bypass position and check that the load is still supplied. 2. Set switch (45) back to Normal position. 614-40095-00 16