Tripp Lite 9PX11KTF11M Eaton 9PX UPS 700-3000 VA 2U Owners Manual - Page 12

2. Presentation 2.5 LCD description After 5 minutes of inactivity, the LCD displays the screen saver. The LCD backlight automatically dims after 10 minutes of inactivity. Press any button to restore the screen. Operation status Load/equipment status Online mode 100% 2.7kW 3.0kVA 100% 19min 1EBM Efficiency: 94% Battery status Efficiency and load group information The following table describes the status information provided by the UPS Note: If other indicator appears, see troubleshooting on page 39 for additional information. Operation status Standby mode Cause The UPS is Off, waiting form startup command from user. Description Equipment is not powered until button is pressed. Online mode The UPS is operating normally. The UPS is powering and protecting the equipment. Battery mode 1 beep every 10 seconds End of backup time 1 beep every 3 seconds High Efficiency mode A utility failure has occured and the UPS is on Battery mode. The UPS is powering the equipment with the battery power. Prepare your equipment for shutdown. The UPS is on Battery mode and the Low Battery Warning settings: battery is running low. [Capacity] [0%] ... [100%] [Runtime] [0mn] ... [60mn] The alarm triggers when the set percentage of battery capacity or remaining back-up time is reached. The UPS is operating on High Efficiency mode. The UPS is powering and protecting the equipment Bypass mode An overload or a fault has occurred, Equipment is powered but not or a command has been received, protected by the UPS. and the UPS is in Bypass mode. Page 12 9PX 1-3 KVA US_EN