Uniden 420 English Owners Manual - Page 18

ADDITIONAL DIRECTORY DIRECTORY DELETING DIRECTORY RECORDS DELETING AN INDIVIDUAL DIRECTORY RECORD 1 . Press DIRECTORY. 2 . Locate the desired record using the ▲▼ buttons or by jumping. 3 . Press ERASE. 4 . The screen will prompt ERASE: erase? 5 . Press ERASE to confirm or END to abort. DELETING ALL DIRECTORY RECORDS 1 . Press DIRECTORY. 2 . Immediately press ERASE without scrolling through the individual records. 3 . The screen will prompt ERASE: all? 4 . Press ERASE to confirm or END to abort. TRANSFERRING A NUMBER FROM LNR (LAST NUMBER REDIAL) TO THE DIRECTORY The 420 allows the number stored in the Last Number Redial memory to be transferred to the Directory. 1 . Press DIRECTORY. DIRECTORY 4 . Press REDIAL to copy the phone number from the LNR. A confirmation tone will sound. 2 . Press SAVE to enter the Program mode. (Enter Name) SAVE:save? GARY BIXBY 5551212 SAVE:save? 5 . Edit the phone number if you wish, then press SAVE to finish. 3 . Enter the name, then press SAVE to proceed. GARY BIXBY (Enter number) SAVE:save? 34 ADDITIONAL FEATURES PROGRAMMING THE FEATURE KEYS Ten FEATURE keys can store twenty names and phone numbers or commonly used CENTREX or other telephone company features. These one touch dial locations can be programmed and dialed by pressing the desired FEATURE key and/or SHIFT key. Maximum capacities: name - 16 characters; number - 32 digits. Write the information you want to store on the FEATURE key index card before your perform the programming steps below. 1 . Press the desired FEATURE key. If you are programming the "second" memory locations, press SHIFT followed by the FEATURE key. (empty) *:edit NOTE: ■ If the FEATURE key is not empty, press ERASE twice to delete the existing name and number. 2 . Press the "❋" key to begin entering the name. (Enter name) 4 . When the desired letter appears, press the button to manually move to the next character. Pressing the button twice will insert a space. 5 . Press SAVE when the name is complete. GARY BIXBY (Enter Number) SPD#: save? 6 . Enter the telephone number using the numeric keypad. GARY BIXBY 5551212 SPD#: save? 3 . Press the appropriate keypad key to toggle through the letters and numbers associated with that key (For examplepress the number "5" key to toggle among the letters "J", "K" and "L", and the number "5"). Saved! 7 . Press the FEATURE key again when done. If you are programming the "second" memory, press SHIFT followed by the FEATURE key to finish. 8 . A confirmation ring will sound. NOTE: ■ If you make a mistake while entering a name or number, use the button to backspace and erase. DIALING USING THE FEATURE KEYS 1 . Go off hook. 2 . Press the desired FEATURE key. To dial the "second" memory, press SHIFT followed by the FEATURE key. 35 ADDITIONAL