Uniden 420 English Owners Manual - Page 6
Initial Programming
View all Uniden 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
PROGRAMMING INITIAL PROGRAMMING TO ENTER THE PROGRAM MODE You are now ready to begin configuring the extension using the PROGRAM mode. Press PROGRAM to enter. TO EXIT THE PROGRAM MODE Press END to exit the PROGRAM mode. Going off-hook will also exit the PROGRAM mode. The PROGRAM mode will also automatically exit after 20 seconds of inactivity. The PROGRAM options are structured like a tree (see Programming Tree page 39). The ▲▼keys are used to navigate options. The programming tree is a loop that returns to the first option as you navigate up or down. SETTING THE LANGUAGE The default language is English. 1 . Press PROGRAM . 3 . Press the button to enter. PROGRAM ▲▼:select LANGUAGE = English ▲▼: select SAVE? ▲ 2 . Press the ▼ button once. LANGUAGE ▲▼: select : enter 4 . Use the ▲▼ buttons to select the desired language. 5 . Press SAVE when done. LANGUAGE = English Programmed! SETTING THE TIME AND DATE 1 . While in the PROGRAM mode, press the ▼ button until the following screen appears: TIME/DATE ▲▼: select : enter ▲ 2 . Press the button to enter. MONTH 01/01 1:00A ▲▼: select SAVE? 10 PROGRAMMING ▲ INITIAL PROGRAMMING SETTING THE TIME AND DATE (cont.) 3 . Use the ▲▼ buttons to select the correct MONTH. 4 . Press SAVE to accept your setting and to advance to the DATE. 5 . Use the ▲▼ buttons to select the correct date. 6 . Press SAVE to accept your settings and advance to the HOUR. 7 . Use the ▲▼ buttons to select the correct hour. 8 . Press SAVE to accept your settings and advance to the MINUTES. 9 . Use the ▲▼ buttons to select the correct minutes. 10.Press SAVE to accept your settings and advance to AM/PM. 11.Use the ▲▼ buttons to select AM or PM. 12.Press SAVE to accept your settings and advance to DAY OF WEEK. 13.Use the ▲▼ buttons to select the correct day. DAY OF WEEK 14.Press SAVE to accept your settings. = Sunday Programmed! SETTING THE EXTENSION ID 1 . While in the PROGRAM mode, press the ▼ button until the following screen appears: EXTENSION NO ▲▼: select : enter 2 . Press the button to enter. EXTENSION NO =22 ▲▼: select SAVE? 3 . Use the ▲▼ buttons to select an extension between 11 and 22. 4 . Press SAVE to accept your choice. EXTENSION = 11 Programmed! 5 . Initial programming is now complete. You can press the PROGRAM button to exit the PROGRAM mode and begin using the 420 with the factory default settings (see TELEPHONE OPERATION on pages 21-29) or you can program additional options. NOTE: ■ If more than one extension in a system is assigned the same ID number, the phone will beep continuously. Press PROGRAM to reassign a unique ID number. SETTING MESSAGE WAITING INDICATOR ON/OFF The light and display indication can be turned ON and OFF in the PROGRAM MODE. See page 21. 11