Uniden APPCAM21 English Owner's Manual - Page 24

If... Motion detection is not working Bright white spots appear at nighttime Memory card error Try this... • Make sure the sensitivity setting is not turned OFF. (Set sensitivity through Settings/Manage Settings.) • Adjust the sensitivity of the motion sensor. (Set sensitivity through Settings/Manage Settings.) • In motion detection mode, a moving object within the camera viewing angle is necessary to trigger the motion sensor for recording. The camera's infrared LEDs produce invisible light that reflects off surfaces such as glass. Install the camera on the other side of windows or place the lens flush against the surface to improve the night vision. Make sure the memory card is correctly inserted and formatted. Wrong date and time are shown My smartphone or wireless device cannot find the camera during initial setup. Please backup the data before formatting. This Format function will erase all data on the memory card. • Make sure you've selected the correct time zone. Unexpected date and time can result in an incorrect recording schedule. (See page 22) (Set Time Zone through Settings/Manage Settings.) • Confirm the system date/time of the mobile device to ensure correct operation. (Set Time Zone through Settings/Manage Settings.) • Refresh the connection. • Reset your camera to the factory default setting. Insert an unbent paper clip into the hole on top of the camera and press it in for several seconds. The LED begins flashing. Remove the paper clip. 24