Uniden CXAI5198 English Owners Manual - Page 15

Setting the Dial Mode, Setting Day and Time, clock/menu

Page 15 highlights

Setting the Dial Mode Dial Mode sets the dial mode to tone or pulse. Most phone systems use tone dialing; the default setting is tone dialing. Set the dialing mode to match the dialing system used by your local phone service. • If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is; otherwise set the unit to pulse dialing. • If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may switch over to tone dialing (refer to "Tone Dialing Switch- over" on page 25). 1) Press clock/menu and the volume down key to move the pointer to select Dial Mode, and then press set. 2) Press the volume up or down key to select Tone or Pulse (the initial setting is Tone). &KCN/QFG 6QPG 2TGUUQTUGV 3) Press set. You will hear a confirmation tone. note SETTING UP YOUR PHONE Setting Day and Time Day & Time sets the day and time of your display. 1) Press clock/menu on the base. 2) Press set to select Time. The system announces "Time", the current time and the guidance for the setting the time. 3) Press the volume up or down key to select the day of the week, and then press set. 4) Enter a two-digit number (01-12) to set hour, and then press set. 5) Enter a two-digit number (00-59) to set minute, and then press set. 6) Press the volume up or down key to choose AM or PM, and then press set. You hear a confirmation tone. Use delete to edit the hour and minute. www.uniden.com SETTING UP YOUR PHONE [14]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

SETTING UP YOUR PHONE [14]
www.uniden.com
Setting the Dial Mode
Dial Mode sets the dial mode to tone or pulse. Most phone systems use tone dialing;
the default setting is tone dialing. Set the dialing mode to match the dialing system
used by your local phone service.
If you are not sure of your dialing system, make a trial call. If the call connects, leave the
setting as is; otherwise set the unit to pulse dialing.
If your phone system requires pulse dialing and you need to send DTMF tones in certain
situations during a call, you may switch over to tone dialing (refer to “Tone Dialing Switch-
over” on page 25).
1) Press
clock/menu
and the volume down key to move the
pointer to select
Dial Mode
, and then press
set
.
2) Press the volume up or down key to select
Tone
or
Pulse
(the initial setting is Tone).
3) Press
set
. You will hear a confirmation tone.
Setting Day and Time
Day & Time sets the day and time of your display.
1) Press
clock/menu
on the base.
2) Press
set
to select
Time
. The system announces “Time”,
the current time and the guidance for the setting the time.
3) Press the volume up or down key to select the day of the
week, and then press
set
.
4) Enter a two-digit number (
01-12
) to set hour, and then press
set
.
5) Enter a two-digit number (
00-59
) to set minute, and then press
set
.
6) Press the volume up or down key to choose
AM
or
PM
, and then press
set
. You hear a
confirmation tone.
Use
delete
to edit
the hour and minute.
note
SE T TI N G U P Y O U R
PHONE