Uniden D1688 English Owners Manual - Page 23

Adapter and Battery Information AC Adapter Part number Input voltage Output voltage Base PS-0034 120V AC, 60 Hz 7.8V AC @ 450mA AC Adapter Part number Input voltage Output voltage Handset PS-0035 120V AC, 60 Hz 8V AC @ 300mA xxUse only the supplied AC adapters. xxUse the proper adapter for the base & any chargers. xxDo not place the unit in direct sunlight or subject it to high temperatures. Battery pack (with normal use) Part number BT-1021 Capacity 300mAh, 2.4V DC Talk time about 7 hours Standby time about 7 days Battery life about 1 year xxReplace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover). xxWhen the battery gets low, the handset beeps and shows a low battery alert; recharge the battery. Rechargeable Battery Warning xxThis equipment contains a rechargeable Nickel-Metal-Hydride (Ni-MH) battery. xxNickel is a chemical known to the state of California to cause cancer. xxDo not short-circuit the battery. xxThe batteries in this equipment may explode if disposed of in a fire. xxDo not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode. As part of our commitment to protecting our environment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used Ni-MH batteries within the United States. Please call 1800-8-BATTERY for information on NiMH battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.) Rechargeable batteries must be recycled or disposed of properly. Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling. Uniden works to reduce lead content in our products & accessories. Compliance Information FCC Part 68 Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company. An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and English - 23