Uniden D1688 English Owners Manual - Page 3

Getting Started Set Up the Base Attach the Stand For desktop use For wall mount use WALL DESK DESK DESK WALL DESK WALL WALL 1. Turn the stand so the word Desk is right-side up (it will be on the left). 2. Insert the tabs into the Desk notches at the top of the base. 3. Slide the stand up until it snaps into place. 1. Turn the stand so the word Wall is right-side up (it will be on the left). 2. Insert the tabs into the WALL notches at the bottom of the base. 3. Slide the stand down until it snaps into place. Remove the stand To remove the stand, pull the locking tabs up and back. Then, slide the stand straight off the opposite direction you put it on. Connect the Corded Handset Use the coiled cord to connect the corded handset to the connector on the left side of the base. For wall mount use only 1. On the front of the base, slide the handset clip out of its slot. 2. Rotate the clip 180 degrees. 3. Flip it from front to back and slide it back into the slot. English - 3