Uniden DFR9 English Owner Manual - Page 6
Install And Turn On Dfr9 - mount
View all Uniden DFR9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALL AND TURN ON DFR9 You can mount the DFR9 on the windshield (bracket included) or on the dashboard (hook and loop tape included). INSTALL/POWER ON Windshield When you mount the DFR9 on the windshield, mount it in the middle of the windshield between the driver and passenger. Be sure there are no obstructions and that there is a clear view through the back window. 1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield. 2. Slide the unit onto the bracket until it clicks into place. 3. Plug the power cord RJ11 connector into the DFR9 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 4. The DFR9 automatically turns on and runs through a self test cycle. Release the DFR9 from the bracket by pressing the Eject key on top of the detector. Dashboard The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard. 1. Attach the unit to the dashboard using the hook and loop fastener tape. 2. Plug the power cord RJ11 connector into the DFR9 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 3. The DFR9 automatically turns on and runs through a self test cycle. Pull the DFR9 from the dashboard, separating the hook and loop tape. -6 -