Uniden UBR223 User Guide - Page 17

•• Quad mode: Monitor displays video from all cameras on a single screen in 4 quadrants. Any channel that does not have a camera is blank. •• Single mode: Monitor displays video from one camera at a time. •• Scan mode: Monitor displays video from one camera at a time, but cycles through all cameras one by one. Use CH► or CH◄ to cycle through these modes. Your system comes with a single camera; therefore, it only displays in Single mode in Live view or a single quadrant in Quad view. Common Operations To... Change between quad view, single view, and scan for Live view Check the temperature Turn on the night light Set the date and time Set the room temperature range for the temperature alert Use the Lullaby function Adjust UBR223 volume Use the Intercom Do This... Press CH► to cycle through the Live modes in the following order: CAM1-CAM2-CAM3-CAM4-QUAD-AUTO Scan - CAM1 The temperature displays on the monitor screen when the camera is in full screen mode. See page 21. Press NIGHT LIGHT on the side of the camera (page 11) or on the monitor (page 13). See page 28 for details. See page 19. See page 22. See page 28. Press ▲Vol (increase volume) or ▼Vol (decrease volume) on either the camera or the monitor. 1. Press and hold TALK on the monitor. 2. Speak into the microphone. 3. Release to hear reply. 17