Uniden UBR223 User Guide - Page 31
Solving Problems
View all Uniden UBR223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SOLVING PROBLEMS If you have problems with the system, there is often a quick and simple solution. Please try the following: If There is no picture from the camera The picture is dropping There are audio problems The picture has become choppy Try • checking all connections to the camera. Make sure the adapter is plugged in. • making sure that the cameras and monitor are both ON. • making sure that the camera is in range of the monitor. • moving the camera closer to the monitor. • repositioning the camera, monitor or both to improve the reception. • adjusting the monitor and camera antennas to vertical position. • making sure that there is sound within range of the camera microphone. • moving the camera or monitor farther apart if the unit emits a loud screeching noise (feedback). The picture may become choppy when experiencing a lower frame rate. Try: The monitor picture has frozen There is an irregular beeping coming from the monitor • moving the camera closer to the monitor. • removing obstructions between the monitor and camera. • adjusting the monitor and camera antennas to vertical position. Use a blunt object like an unbent paper clip to press RESET and reset the monitor. The monitor turns off. Press POWER to turn it back on again. That is the Alert tone. Go to the Alert screen to turn the alert volume down or off (see page 23). 31