Uniden WXI377 English Owners Manual - Page 11

Low battery alert, Battery use time per charge

Page 11 highlights

GETTING STARTED If the rubber seal appears warn, nicked, or dried out, replacement seals are available through the Uniden Parts Department. If you have questions regarding installation of battery pack and/or rubber seal, please call our Customer Hotline at 1-800-297-1023. Battery use time (per charge) From fully charged (15-20 hours charge time) • Up to seven hours continuous use during talk mode • Up to fourteen days when the handset is in the standby mode Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, "Low Battery" appears on the LCD and none of the keys will operate. If the phone is in use, "Low Battery" flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. The last number dialed in the redial memory, as well as, the names and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack. • Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call. • Talk Mode The handset is off the base and talk/flash has been pressed enabling a dial tone. • Standby Mode The handset is not in use, off the base and talk/flash has not been pressed. A dial tone is not present. www.uniden.com G E T T I N G S T A R T E D [ 11 ]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

GETTING STARTED
[ 11 ]
www.uniden.com
GETTING STARTED
Even when the
battery pack is not
being used, it will
gradually discharge
over a long period
of time. For optimum
performance, be sure
to return the handset
to the base unit after
a telephone call.
Talk Mode
-
The handset is off the
base and
talk/flash
has been pressed
enabling a dial tone.
Standby Mode
-
The handset is not in
use, off the base and
talk/flash
has not
been pressed. A dial
tone is not present.
The last number dialed in the redial memory, as well as, the names and the numbers
stored in the memory locations are retained for up to 30 minutes while you replace the
battery pack.
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order
to save power. If the phone is not in use,
Low Battery
appears on the LCD and none of the keys will operate.
If the phone is in use,
Low Battery
flashes and the
handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for charging.
Battery use time (per charge)
From fully charged (15-20 hours charge time)
Up to seven hours continuous use during talk mode
Up to fourteen days when the handset is in the standby mode
If the rubber seal appears warn, nicked, or dried out,
replacement seals are available through the Uniden Parts
Department. If you have questions regarding installation of
battery pack and/or rubber seal, please call our Customer
Hotline at 1-800-297-1023.