Uniden WXI377 English Owners Manual - Page 12
C. Connect the base unit
UPC - 050633152287
View all Uniden WXI377 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. Route the cord. • The base is not water resistant. Also wipe off a dirty or wet handset before placing in the base. • Use only the supplied AD-0002 AC adapter. Do not use any other AC adapter. • Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. 2) Set the base on a desk or tabletop, and place the handset in the base unit. 3) Make sure that the charge/in use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset is sitting correctly in the base. • Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. • After activating the handset, charge your handset at least 15-20 hours before plugging into the phone line. 4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular [ 12 ] G E T T I N G S T A R T E D www.uniden.com