Uniden WXI377 English Owners Manual - Page 3

QUICK REFERENCE GUIDE Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. Note: Your handset comes with the battery already connected. You must activate the handset. Please see the instructions below. • Base unit • Handset • AC adapter • Telephone cord • Beltclip • This Owner's Manual • Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a.m. to 5:00 p.m. CST. We can also be reached on the web at www.uniden.com Step 2 Activate the Handset Before Charging the Battery Before charging the battery, push the A pin located on the bottom of the handset to activate (see label with instructions). C Plug the AC adapter cord into the base unit and then into a 120V AC outlet. Place the handset in the base and D charge continuously for 15 - 20 hours before using the phone. Step 3 Connect to Phone Line When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack. Your phone is set for tone dialing. If your local network requires pulse dialing, please see "Choosing the dialing mode" on page 17. Step 4 Setting Display Options Note: Three Caller ID options are available: AutoTalk, Caller ID on Call Waiting (CIDCW), and Area Code. TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS A Press and hold the cid/menu key. B Press the vol/+ or vol/- key to move the pointer to an option. C Press select to change the option setting. D Press end to exit, and return the handset to the base. OPTIONS INCLUDE A Auto Talk On/Off B CIDCW On/Off (Caller id/call waiting) C Area Code Enter/Remove B Peel off the label. www.uniden.com D Dial Pulse/Tone E Language Eng (English)/Fr. (French) QUICK REFERENCE GUIDE [ 3 ]