Via 7001G User Manual - Page 22
Hard Disk Connectors, IDE1 & IDE2
UPC - 825529000788
View all Via 7001G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 3 CONNECTORS Hard Disk Connectors: IDE1 & IDE2 The mainboard has a 32-bit Enhanced IDE and Ultra DMA 133/100/66 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 133/100/66 functions. You can connect up to four hard disk drives, CD-ROM and other devices. The primary hard drive should always be connected to IDE1 as the master drive. Both IDE drives can connect to a master and a slave drive. IDE1-2 1 If two drives are connected to a single cable, the jumper on the second drive must be set to slave mode. Refer to the drive documentation supplied by the vendor for the jumper settings. 14
Chapter 3
14
C
ONNECTORS
Hard Disk Connectors:
IDE1 & IDE2
The mainboard has a 32-bit Enhanced IDE and Ultra DMA 133/100/66
controller that provides PIO mode 0~4, Bus Master, and Ultra DMA
133/100/66 functions.
You can connect up to four hard disk drives, CD-ROM
and other devices.
The primary hard drive should always be connected to IDE1 as the master
drive.
Both IDE drives can connect to a master and a slave drive.
1
IDE1-2
If two drives are connected to a single cable, the jumper on the second drive
must be set to slave mode.
Refer to the drive documentation supplied by the
vendor for the jumper settings.