Via 7001G User Manual - Page 64
Write to Read CMD Twtr
UPC - 825529000788
View all Via 7001G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 3 ACT(0) to ACT(1) (TRRD) This field is only available when "DRAM Timing" is set to "Manual". Settings: [2T, 3T, 4T, 5T] Read to Precharge (Trptp) Settings: [2T, 3T] Write to Read CMD (Twtr) Settings: [1T/2T, 2T/3T] Write Recovery Time (Twr) Settings: [2T, 3T, 4T, 5T] DRAM Command Rate This field is for setting how fast the memory controller sends out commands. Lower setting equals faster command rate. Note: Some memory modules may not be able to handle lower settings. Settings: [2T Command, 1T Command] RDSAIT Mode Settings: [Manual, Auto] RDSAIT Selection Key in a HEX number. Settings: [Min = 0000, Max = 003F] Auto Detect PCI Clk Settings: [Disabled, Enabled] CPU Clock Key in a DEC number. Settings: [Min = 100, Max = 333] 56
Chapter 3
56
ACT(0) to ACT(1) (TRRD)
This field is only available when “DRAM Timing” is set to “Manual”.
Settings: [2T, 3T, 4T, 5T]
Read to Precharge (Trptp)
Settings: [2T, 3T]
Write to Read CMD (Twtr)
Settings: [1T/2T, 2T/3T]
Write Recovery Time (Twr)
Settings: [2T, 3T, 4T, 5T]
DRAM Command Rate
This field is for setting how fast the memory controller sends out commands.
Lower setting equals faster command rate.
Note:
Some memory modules may not be able to handle lower settings.
Settings: [2T Command, 1T Command]
RDSAIT Mode
Settings: [Manual, Auto]
RDSAIT Selection
Key in a HEX number.
Settings: [Min = 0000, Max = 003F]
Auto Detect PCI Clk
Settings: [Disabled, Enabled]
CPU Clock
Key in a DEC number.
Settings: [Min = 100, Max = 333]