Via 7001G User Manual - Page 59
PNP OS Installed, Reset Configuration Data
UPC - 825529000788
View all Via 7001G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
PNP/PCI CONFIGURATIONS BIOS Setup Phoenix - AwardBIOS CMOS Setup Utility PnP / PCI Configurations PNP OS Installed Reset Configuration Data [No] [Disabled] Resources Controlled By IRQ Resources Assign IRQ For VGA Assign IRQ For USB [Auto(ESCD)] Press Enter [Enabled] [Enabled] Item Help Menu Level Select Yes if you are using a Plug and Play capable operating system. Select No if you need the BIOS to configure non-boot devices : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General F7: Optimized Defaults Help Note: This section covers some very technical items and it is strongly recommended to leave the default settings as is unless you are an experienced user. PNP OS Installed Setting Yes No Description BIOS will only initialize the PnP cards used for booting (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating system BIOS will initialize all the PnP cards Reset Configuration Data This field should usually be left "Disabled". Setting Enabled Disabled Description Resets the ESCD (Extended System Configuration Data) after exiting BIOS Setup if a newly installed PCI card or the system configuration prevents the operating system from loading Default setting 51