Via EPIA-EK10000G User Manual - Page 26
Serial ATA Connectors, SATA1 and SATA2, CD-In Connector, CD_In, System Management Bus Connector,
UPC - 825529003581
View all Via EPIA-EK10000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 2 Serial ATA Connectors: SATA1 and SATA2 These next generation connectors support the thin Serial ATA cables for primary internal storage devices. The current Serial ATA interface allows up to 150 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (Ultra DMA). SATA1-2 CD-In Connector: CD_In This pin header allows you to receive stereo audio input from sound source such as a CD-ROM. Pin Signal 1 Left channel 2 GND 3 GND 4 Right channel CD_In 1 System Management Bus Connector: SMBus This pin header allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. Pin Signal 1 SMBCK 2 SMBDT 3 GND SMBUS 1 18
Chapter 2
18
Serial ATA Connectors:
SATA1 and SATA2
These next generation connectors support the thin Serial ATA
cables for primary internal storage devices.
The current Serial
ATA interface allows up to 150 MB/s data transfer rate, faster
than the standard parallel ATA with 133 MB/s (Ultra DMA).
CD-In Connector:
CD_In
This pin header allows you to receive stereo audio input from sound source
such as a CD-ROM
.
Pin
Signal
1
Left channel
2
GND
3
GND
4
Right channel
System Management Bus Connector:
SMBus
This pin header allows you to connect SMBus (System Management Bus)
devices.
Devices communicate with an SMBus host and/or other SMBus
devices using the SMBus interface
.
Pin
Signal
1
SMBCK
2
SMBDT
3
GND
SATA1-2
SMBUS
1
CD_In
1