Via EPIA-EK10000G User Manual - Page 29
Front Panel Audio Connector, F_AUDIO
UPC - 825529003581
View all Via EPIA-EK10000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installation Front Panel Audio Connector: F_AUDIO This is an interface for the VIA front panel audio cable that allow convenient connection and control of audio devices. By default, the pins labeled LINE_OUT_R / NEXT_R and the pins LINE_OUT_L / NEXT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable. Pin Signal 1 FRON_MIC 3 MIC_BIAS 5 LINE_OUT_R 7 NC 9 LINE_OUT_L Pin Signal 2 GND 4 +5VDUAL 6 NEXT_R 8 Key 10 NEXT_L F_AUDIO 1 2 9 10 Note: If you don't want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on the back panel will not function. 21
Installation
21
Front Panel Audio Connector:
F_AUDIO
This is an interface for the VIA front panel audio cable that allow convenient
connection and control of audio devices.
By default, the pins labeled
LINE_OUT_R / NEXT_R and the pins LINE_OUT_L / NEXT_L are shorted with
jumper caps.
Remove the caps only when you are connecting the front panel
audio cable.
Pin
Signal
Pin
Signal
1
FRON_MIC
2
GND
3
MIC_BIAS
4
+5VDUAL
5
LINE_OUT_R
6
NEXT_R
7
NC
8
Key
9
LINE_OUT_L
10
NEXT_L
Note:
If you don’t want to connect to the front audio header, pins 5 & 6, 9 & 10
have to be jumpered in order to have signal output directed to the rear
audio ports. Otherwise, the Line-Out connector on the back panel will not
function.
F_AUDIO
1
2
9
10